AutoFishScalers.com - Commercial Electric Fish Scalers & Pin Bone Removers

Commercial Electric Fish Scalers, Skinners & Pin-Bone Removers



After scaling tons of fish by hand for many years, I'll never go without one of these again.

B.C., Hull's Seafood Market 10/13/2022

WORLDWIDE SALES

Veteran Owned Small Business

Veteran-Owned

(800) 939-6811

Need help? Call or Email

info@autofishscalers.com

8:30 to 5:00  M-F ET


Finding you guys may have been the discovery of my month!
D.Y., Hawaii 7/13/2021

KT-S Electric Fish Scaler
Spotlight!

Price: $1,269.00
    Cord Length:

    Voltage:



    Update price
    Item #: KTS
    Availability: In Stock
    Quantity:

    The KT-S Electric Fish Scaler is the preferred choice of commercial fisheries all over the world.

    The reason? The cord is thinner (9/16"), lighter and more flexible than any other commercial hand scaler, allowing the operator to work longer without tiring. If you are seeking a scaler with a 220 volt power supply, please contact us in email or by phone.  

    Construction of the KT-S

    The metal scaling head is protected by a metal splash guard, and spins on ball-bearings. All external parts are waterproof. The cable casing has 4 layers, 2 of steel, one of insulation, and a rubber outer cover.

    The motor is housed in an internally grounded stainless steel box with an on/off switch, securely insulated and protected from spray. Because it is internally grounded, the KT-S does not require an external ground. It can be plugged into a wall socket that is grounded or not, and it comes equipped with the proper plug for the destination country.

    Get the Right Spindle

    The KT-S is shipped with the Standard scaling head (spindle) as shown. However, you should also get the spindle that is best for the fish you are scaling. Using the right spindle will greatly increase production.


    KT-S Spindles

    Name   Length   Photo
    Salmon 2.25"/5.72cm Salmon Spindle
    Large Scale Fish (Carp, Barramundi, etc.) 2.25"/5.72cm KT-S Spindle for large scale fish
    Diamond (sharper edges, more aggressive and faster for some fish) 2.25"/5.72cm KT-S Diamond Scale Spindle
    •••
    Long Salmon Spindle (twice as long for bigger, flat sided salmon)
    4.5"/11.44 cm
    KTS Long Salmon Spindle
    Long Standard Spindle (twice as long for larger flat fish) 4.5"/11.44 cm KTS Long Standard Spindle

    The KT-S is capable of continuous use in commercial fishing operations.

    This is the most durable, heavy duty electrical fish scaler you can find. The KT-S Electric Fish Scaler is made in Europe.

    In addition to domestic sales, we have shipped the KT-S Electric Fish Scaler to Canada, the Middle East, Europe, Australia, New Zealand and many other countries.

    The KT-S is available in 110v or 220v.

    The drive cable can be either 150cm (59") or 200cm (78") long. Consider your work setup when ordering. Take a look at the video for ideal placement.

    Maintenance

    Normally, there is very little maintenance required of the KT-S other than lubricating the drive shaft monthly and replacing it when it breaks. All hand fish scalers have a rotating metal drive shaft that wears over time and breaks due to metal fatigue or too much pressure. Normally, a drive shaft will last between 10-12 months, but it can break sooner.

    We recommend having a spare on hand so you do not have down time when it does. When it breaks it is easily replaced. Follow this DRIVE SHAFT and/or CASING REPLACEMENT GUIDE, which will also show you how to replace the casing if necessary.

    To get the most out of the shaft, it should be lubricated when installed and then monthly in use. We recommend this Food Grade Super Lube Grease available from Grainger.

     

    Note on Voltage:

    We recommend that you order the voltage that is in general use in your country. For countries in North America, it is 110v. For most other countries it is normally 220v. It generally comes with the plug used in your country.

    Call Us!

    Call us with any questions about buying the KT-S Electric Fish Scaler or to discuss your needs and the processing at your facility.

    Residents of the 48 states can order on line or call. All others should call or email us for a quote including shipping. We will help choose the best electric fish scaling and pin-bone removing products for you.

    • Motor: .18 kw motor housed in a metal case with an on/off switch and carrying handle. Internally grounded and protected from spray.
    • Weight & Size: Motor unit: 9" h x 7.5" w x 9.5" depth. Shipping weight is 28 lbs.
    • Electric cord: 6' L with 2 prong plug (it is internally grounded). Electric power required is 110/60/1. 230/50/1 is available.
    • Heads: Solid steel 2.25" scaling surface with shield that surrounds all but the area in contact with the fish. Scaling head is ball-bearing driven with clog-free scaling blades. It is very important that you get the right head for the species you are scaling.
      • Standard head is used for most fish. THE STANDARD HEAD COMES WITH THE SCALER. OTHER HEADS ARE OPTIONAL.
      • Diamond head has sharper edges and is preferred by many for all fish.
      • Salmon head has cutouts for slime.
      • Large scale head is used for fish with very large scales.
      • Standard and Salmon Long heads are available for bigger, flat sided fish. They are 4.5" long.
      • Heads can be easily replaced by removing one screw, changing head, and replacing screw.
    • Drive Cable: The drive cable is either 59" (150 cm) or 78" (200 cm) long and is laminated with 2 layers of steel, one of insulation and a rubber cover.

    This is a link to the Operator's Manual in pdf format. It has detailed information about the KT-S electric fish scaler including specifications, a parts diagram with a listing of all parts and operating instructions.

    Click KT-S OPERATOR'S MANUAL.

    To purchase parts

    1. Enter the quantity for each of the items you want.

    2. Then click the Add to Cart at top or bottom. You can repeat if necessary.



    OUR FISH SCALERS AND PIN-BONE REMOVERS

    We sell high-quality commercial fish scalers and commercial pin-bone removers for companies and markets that process fish. Our products are reliable and very durable.

    NATIONAL DISTRIBUTOR

    In the United States we are a national distributor for KT-S fish hand scalers, EXOS and Ryco automatic pin-bone removers and Trifisk automatic fish scalers.

    SHIPPING & INTERNATIONAL DISTRIBUTION

    In addition to sales in the USA, we have shipped electric fish scalers and pin-bone removers to many countries world-wide, including Australia, Bahrain, Canada, Dubai, Estonia, Finland, Kazakhstan, Mexico, New Zealand, Qatar, Saudi Arabia, Thailand, and the UK, among others. Call or email for a quick quote.