AutoFishScalers.com - Commercial Electric Fish Scalers & Pin Bone Removers

Commercial Electric Fish Scalers & Pin-Bone Removers



After scaling tons of fish by hand for many years, I'll never go without one of these again.

B.C., Hull's Seafood Market 10/13/2022

WORLDWIDE SALES

Veteran Owned Small Business

Veteran-Owned

(800) 939-6811

Need help? Call or Email

info@autofishscalers.com

8:30 to 5:00  M-F ET


Finding you guys may have been the discovery of my month!
D.Y., Hawaii 7/13/2021

Most parts for the Northrock fish electric fish scaler are listed below. If you need something that is not shown, please call or email us with the part numbers.

The parts that wear are almost always the drive shaft and sometimes the casing. Plan on replacing your drive shaft at least once a year. We recommend that you keep a spare on hand so that you will not lose productive time.

MAINTENANCE GUIDE FOR NORTHROCK DRIVE SHAFT AND CASING

When you do replace the drive shaft or casing, follow this guide. You can print it out. You can also use the guide to troubleshoot any problems you might have in operation. It is almost always the result of loose connections or a damaged drive shaft or casing.

TOOL/CUTTER GUIDE

The Diamond cutter is for the majority of fish, such as Flounder, Snapper, Perch, Whitefish, Salmon, Haddock, and Sea Bass.

The Eight flute cutter is for small to medium scale fish with thin skin.

The Six flute cutter is for larger fish with thick skin, such as Carp, Buffalo, and Grouper.

ALL PARTS

If you do not see what you need, go to the

User Manual and Parts Guide. It applies to all Northrock, Haskins-Strand and Food Machinery of America electric fish scalers.

Northrock, Haskins-Strand and FMA User Manual and Parts Guide


Products 1-17 of 17
Show
Northrock HD Core Adapter - AutoFishScalers.com
Price: $83.00
Availability: 1 week or less
Northrock Item #: 160DX2 -

This is the adaptor for the Heavy Duty Northrock fish scaler. It attaches to the motor and fits the Heavy Duty cable. There is a separate core adaptor for the Standard Northrock fish scaler.  

Northrock Hvy Duty Core - AutoFishScalers.com
Price: $116.00
Availability: 1 week or less
Northrock Item #: 250CD4 -

Northrock Fish Scaler Part - Heavy Duty CoreThe Northrock Electric fish scaler comes in 2 versions: Standard and Heavy Duty. The difference is in the diameter of the drive cable (core). The Standard duty is 5/16 (compressed to 1/4" at the ends) and the Heavy Duty is 3/8" (compressed to 5/16" at the ends). They are not interchangeable, and the only way to tell what you have is by measuring. Northrock Heavy Duty core. The metal cable is 3/8" in diameter and has 2 square ends 5/16" in diameter....

Northrock Shaft Assem. Std Duty - AutoFishScalers.com
Price: $320.00
Availability: 1 week or less
Northrock Item #: 25BB4 -

Our Northrock Fish Scaler Parts Northrock Standard Duty core and rubber casing assembly. The metal cable is 5/16" in diameter and has 2 square ends 1/4" in diameter. The core inside the casing looks like this:This is a picture of the casing: When you replace the drive shaft or casing, follow this guide. You can print it out. You can also use the guide to troubleshoot any problems you might have in operation. It is almost always the result of loose connections or a damaged drive shaft or...

Northrock Shaft Assembly Hvy Duty - AutoFishScalers.com
Price: $350.00
Availability: 1 week or less
Northrock Item #: 25BC4 -

Northrock Heavy Duty core and rubber casing assembly. The metal cable is 3/8" in diameter and has 2 square ends 5/16" in diameter. The core inside the casing looks like this:This is a picture of the casing:When you replace the drive shaft or casing, follow this guide. You can print it out. You can also use the guide to troubleshoot any problems you might have in operation. It is almost always the result of loose connections or a damaged drive shaft or casing. ...

Northrock STD Core Adapter - AutoFishScalers.com
Price: $83.00
Availability: 1 week or less
Northrock Item #: 160DW2 -

This is the core adaptor for the STANDARD Northrock fish scaler.  http://www.cnn.com/ It attaches to the motor to drive the Northrock Standard core (drive cable).  It will not work on the Heavy Duty model.

Northrock Std Duty Core - AutoFishScalers.com
Price: $86.00
Availability: 1 week or less
Northrock Item #: 250CC4 -

Northrock Fish Scaler Standard Duty CoreThe Northrock Electric fish scaler comes in 2 versions: Standard and Heavy Duty. The difference is in the diameter of the drive cable (core). The Standard duty is 5/16 (compressed to 1/4" at the ends) and the Heavy Duty is 3/8" (compressed to 5/16" at the ends). They are not interchangeable, and the only way to tell what you have is by measuring. Northrock Standard Duty core. The metal cable is 5/16" in diameter and has 2 square ends 1/4" in diameter....

Fish Scaler Shaft Lubricant
Price: $26.00
Availability: In Stock
Northrock Item #: 520A1 -

Lubricant for fish scaler rotating shafts. 1 lb container. MSDS (OSHA Safety Data Sheet) here.

Handpiece for Northrock Standard Duty Fish Scaler - AutoFishScalers.com
Price: $286.00
Availability: 1 week or less
Northrock Item #: 25AE2 -

Northrock Standard Duty Fish Scaler Hand-pieceThe Northrock Standard Duty handpiece is made of high quality corrosion resistant aluminum.The Northrock Electric fish scaler comes in 2 versions: Standard and Heavy Duty. The difference is in the diameter of the drive cable. The Standard duty is 5/16 (compressed to 1/4" at the ends) and the Heavy Duty is 3/8" (compressed to 5/16" at the ends). They are not interchangeable, and the only way to tell what you have is by measuring.This is the...

Handpiece for the Northrock Heavy Duty Electric Fish Scaler - AutoFishScalers.com
Price: $286.00
Availability: 1 week or less
Northrock Item #: 25AE1 -

Northrock HD Fish Scaler HandpieceThe Northrock Heavy Duty handpiece is made of high quality corrosion resistant aluminum.The Northrock Electric fish scaler comes in 2 versions: Standard and Heavy Duty. The difference is in the diameter of the drive cable. The Standard duty is 5/16 (compressed to 1/4" at the ends) and the Heavy Duty is 3/8" (compressed to 5/16" at the ends). They are not interchangeable, and the only way to tell what you have is by measuring.This is the hand-piece that works...

Northrock Guard (for 6 flute tool) - AutoFishScalers.com
Price: $108.00
Availability: 1 week or less
Northrock Item #: 270A3 -

Northrock Handpiece Guard for 6 flute tool The Northrock 6 flute tool is larger than either the 8 flute or diamond tool, so its guard is slightly larger to accommodate the larger size. This tool can also be used with the diamond tooth and eight flute tools, but it will have a slightly bigger gap allowing for a bit more spray. It is made of high strength, impact resistant, glass-filled nylon.When you order a guard, the set screws come with the purchase. ...

Northrock Guard for Diamond and 8 flute tool - AutoFishScalers.com
Price: $75.00
Availability: 1 week or less
Northrock Item #: 270B3 -

Northrock Handpiece Guard for Diamond and 8 flute tool The Northrock handpiece guard for Diamond and eight flute tool is slightly smaller than the guard for the six flute tool. It attaches to the handpiece to cover the scaling tool to reduce the spray. It is made of high strength, impact resistant, glass-filled nylon.When you order a guard, the set screws come with the purchase.

Northrock HD Complete Scaling Head
Price: $845.00
Availability: 1 week or less
Northrock Item #: NR-HD-CompSH -

The Northrock Scaling Head Complete, Heavy Duty, includes all parts connected to the motor to drive the scaling head for the heavy duty Northrock Fish Scaler. PLEASE NOTE: These parts are designed to fit the motor that came with your Northrock, Haskins-Strand or Food Machinery of America Fish Scaler. With this you will turn your scaler into a Northrock Heavy Duty Fish Scaler. These parts are NOT assembled. They ship individually. Assembly is not difficult. The parts: 160DX2 The Heavy Duty Core...

Northrock SD Complete Scaling Head
Price: $775.00
Availability: 1 week or less
Northrock Item #: NR-SD-CompSH -

The Northrock Scaling Head Complete, Standard duty, includes all parts connected to the motor to drive the scaling head for the standard duty Northrock Fish Scaler. PLEASE NOTE: These parts are designed to fit the motor that came with your Northrock, Haskins-Strand or Food Machinery of America Fish Scaler. With this you will turn your scaler into a Northrock Standard Duty Fish Scaler. These parts are NOT assembled. They ship individually. Assembly is not difficult. The parts: 160DW1 The...

Northrock Rubber Flex Shaft Casing - AutoFishScalers.com
Price: $286.00
Availability: 1 week or less
Northrock Item #: 275BH4 -

Our Northrock Fish Scaler Parts The Northrock flexible casing is made of rubber with metal connections and 10" end guards. It is 53" long and 3/4" thick. It is used with both the Standard and Heavy Duty metal cores on Northrock Scalers. It has connections to fit the motor and handle ends. Haskin Strand and Food Machinery of America Standard scalers also use this flexible casing, but need a different casing for their Heavy Duty scalers. When you replace the drive shaft or casing, follow this...

Picture of Northrock Diamond Spindle - from AutoFishScalers.com
Price: $113.00
Availability: 1 week or less
Northrock Item #: 225C1 -

Our Fish Scaling Diamond Tooth Tool The Northrock Diamond Tooth Cutter is the standard head for the Northrock Scaler. Handles most fish, including Flounder, Snapper, Perch, Whitefish, Salmon, Haddock and Sea Bass. It fits the Northrock, Haskins-Strand and Food Machinery of America scalers. Questions Call us with any questions about buying the Northrock Diamond Tooth Tool or to discuss your needs and the processing at your facility. We will help choose the best electric fish scaling and...

Northrock Eight Flute Tool - AutoFishScalers.com
Price: $120.00
Availability: 1 week or less
Northrock Item #: 225A1 -

Our Fish Scaling Eight Flute Tool The Northrock Eight Flute tool is used on small to medium scale fish with thin skin that could be damaged by coarser tools. It fits the Northrock, Haskins-Strand and Food Machinery of America scalers. Questions? Call us to with any questions about buying the Northrock Eight Flute Tool or to discuss your needs and the processing at your facility. We will help choose the best electric fish scaling and pin-bone removing products for you. Ask for Ron. ...

Northrock Six Flute Tool - AutoFishScalers.com
Price: $163.00
Availability: 1 week or less
Northrock Item #: 225B1 -

Our Fish Scaling Six Flute Tool The Northrock Six Flute Tool is used for large scale fish with thick skin such as Carp, Buffalo and Grouper. It fits the Northrock, Haskins-Strand and Food Machinery of America scalers. Guard is shown with the Diamond Tooth Tool (not included). Questions? Call us to with any questions about buying the Northrock Six Flute Tool or to discuss your needs and the processing at your facility. We will help choose the best electric fish scaling and pin-bone removing...

OUR FISH SCALERS AND PIN-BONE REMOVERS

We sell high-quality commercial fish scalers and commercial pin-bone removers for companies and markets that process fish. Our products are reliable and very durable.

NATIONAL DISTRIBUTOR

In the United States we are a national distributor for KT-S fish hand scalers, EXOS and Ryco automatic pin-bone removers and Trifisk automatic fish scalers.

SHIPPING & INTERNATIONAL DISTRIBUTION

In addition to sales in the USA, we have shipped electric fish scalers and pin-bone removers to many countries world-wide, including Australia, Bahrain, Canada, Dubai, Estonia, Finland, Kazakhstan, Mexico, New Zealand, Qatar, Saudi Arabia, Thailand, and the UK, among others. Call or email for a quick quote.